1)Part #and Name-$19.90 - PRT-10217 - LiPo Charger Basic ($9.95 ea.) 2units Manufactures-N/a Vender-SparkFun Link to data Sheet-http://www.sparkfun.com/products/10161 Product description -The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
2)Part #and Name- $11.85 - PRT-09771 - Theragrip Thermal Tape ($3.95 ea.)3units Manufactures-N/a Vender-SparkFun Link to data Sheet-http://www.sparkfun.com/products/10161 Product description- Thermalloy Theragrip is a double sided tape for ceramic or metal heatsink packages. Theragrip provides both good thermal performance and excellent electrical isolation.
3)Part #and Name-$11.85 - COM-10256 - MOSFET Power Control Kit ($3.95 ea.)3units Manufactures-N/a Vender-SparkFun Link to data Sheet-http://www.sparkfun.com/products/10161 Product description- -This MOSFET power control kit is basically a breakout for RFP30N06LE which is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V micro controller or mechanical switch.
Manufactures-N/a Vender-SparkFun Link to data Sheet-http://www.sparkfun.com/products/731 Product description--This is a very small, extremely light weight batty based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 110mAh! Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins.
Manufactures-Leah Buechle Vender-SparkFun Link to data Sheet-http://www.sparkfun.com/products/8786 Product description--A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.
Part #and Name -922007094-02 Dynatron DF124028_U 40x40x28MM SLEE (9.78EA Total with S&H = 34.54) Manufactures- www.dynatron-corp.com/ Vendor- www.compuvest.com/ Link to data Sheet- http://www.dynatron-corp.com/en/product_detail_1.aspx?cv=&id=46&in=0 Reason for purchase -This CPU fan was purchased to be a heat sink for our TECs. It will disperse the heat that accumulates on it.
Part #and Name -SEN-00245 One Wire Digital Temp Sensor (Quantity 8) Manufactures- http://www.maxim-ic.com/ Vendor- http://www.sparkfun.com/ Link to data Sheet- http://datasheets.maxim-ic.com/en/ds/DS18B20.pdf Reason for purchase -This is the temperature sensor which will gather data about our targets temp. The data is sent to the lilypad which uses it to determine when to operate the TECs.
(
Subtotal : $109.30
Shipping/Handling : $24.99
Grand Total : $134.29)
2 - $29.90 - DEV-10275 - Lilypad FTDI Basic Breakout - 5V ($14.95 ea.) 1 - $1.95 - PRT-09599 - Heat Sink Compound 1 - $14.95 - DEV-08937 - LilyPad XBee 1 - $4.95 - ROB-08449 - Vibration Motor 4 - $17.00 - SEN-00245 - One Wire Digital Temperature Sensor - DS18B20 ($4.25 ea.) 4 - $23.80 - SEN-09673 - Force Sensitive Resistor - Small ($5.95 ea.) 4 - $3.80 - COM-00529 - Super Bright LED - Blue - 1pcs ($0.95 ea.) 3 - $65.85 - DEV-09266 - LilyPad Arduino 328 Main Board ($21.95 ea.)
Subtotal : $162.20 Shipping/Handling : $14.77 Grand Total : $176.97
Manufactures-N/a
Vender-SparkFun
Link to data Sheet-http://www.sparkfun.com/products/10161
Product description -The USB LiPo Charger is a basic charging circuit that allows you to charge 3.7V LiPo cells at a rate of 500mA or 100mA per hour. It is designed to charge single-cell Li-Ion or Li-Polymer batteries.
2)Part #and Name- $11.85 - PRT-09771 - Theragrip Thermal Tape ($3.95 ea.)3units
Manufactures-N/a
Vender-SparkFun
Link to data Sheet-http://www.sparkfun.com/products/10161
Product description- Thermalloy Theragrip is a double sided tape for ceramic or metal heatsink packages. Theragrip provides both good thermal performance and excellent electrical isolation.
3)Part #and Name-$11.85 - COM-10256 - MOSFET Power Control Kit ($3.95 ea.)3units
Manufactures-N/a
Vender-SparkFun
Link to data Sheet-http://www.sparkfun.com/products/10161
Product description- -This MOSFET power control kit is basically a breakout for RFP30N06LE which is a very common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V micro controller or mechanical switch.
4)Part #and Name-$20.85 - PRT-00731 - Polymer Lithium Ion Battery - 110mAh ($6.95 ea.)3units
Manufactures-N/a
Vender-SparkFun
Link to data Sheet-http://www.sparkfun.com/products/731
Product description--This is a very small, extremely light weight batty based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 110mAh! Comes terminated with a standard 2-pin JST connector - 2mm spacing between pins.
5)Part #and Name-$44.85 - DEV-08786 - LilyPad LiPower ($14.95 ea.)-)3units
Manufactures-Leah Buechle
Vender-SparkFun
Link to data Sheet-http://www.sparkfun.com/products/8786
Product description--A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about LiPower is the ability to use rechargable Lithium Polymer batteries. These batteries are smaller, flatter, and last much longer than a AAA battery. Attach a single cell LiPo battery, flip the power switch, and you will have a 5V supply to power your LilyPad network. Good up to 150mA. Short circuit protected.
Part #and Name -922007094-02 Dynatron DF124028_U 40x40x28MM SLEE (9.78EA Total with S&H = 34.54)
Manufactures- www.dynatron-corp.com/
Vendor- www.compuvest.com/
Link to data Sheet- http://www.dynatron-corp.com/en/product_detail_1.aspx?cv=&id=46&in=0
Reason for purchase -This CPU fan was purchased to be a heat sink for our TECs. It will disperse the heat that accumulates on it.
Part #and Name -67-3AIT-R2BW 12"x12" Vacuum Form Machine ($129.95)
Manufactures- http://www.widgetworksunlimited.com/
Vendor- http://www.amazon.com/
Link to data Sheet- http://www.widgetworksunlimited.com/12_x12_Hobby_Vacuum_Former_p/vf-12x12-vac_former.htm
Reason for purchase -This vacuum form machine was purchase to serve as a means to assemble the fans and TECs together as one component.
Part #and Name – COM-10256 MOSFET Power Controll Kit (Quantity 3)
Manufactures- N/A
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/Components/General/MOSFET-Power-Control-v10.pdf
Reason for purchase -This Mosfet is used as a switch by the lilypad to regulate the power flowing to the TECs and Heat Sinks.
Part #and Name -DEV-08786 Lilypad LiPower (Quantity 3)
Manufactures- http://www.arduino.cc/en/Main/ArduinoBoardLilyPad
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-PowerSupply-Lipo.pdf
Reason for purchase -This device is built to function as a 5V power supply to the lilypad microcontroller when connected to a battery.
Part #and Name -DEV-09266 Lilypad Arduino 328 Main Board (Quantity 3)
Manufactures- http://www.arduino.cc/en/Main/ArduinoBoardLilyPad
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.atmel.com/dyn/resources/prod_documents/8271S.pdf
Reason for purchase – This Lilypad is the microcontroller for our operation. It will read the temperature data and operate the TECs using the mosfet and code.
Part #and Name -DEV-09716 FTDI Basic Breakout 5V (Quantity 3)
Manufactures- Leah Buechley and SparkFun Electronics
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI%20Basic-v21-5V.pdf
Reason for purchase -This breakout board helps supply the battery power to the lilypad and has indication LEDs to show whether it is operational.
Part #and Name -PRT-00731 Polymer Lithium Ion Battery – 110mAh (Quantity 3)
Manufactures- N/A
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/Batteries/UnionBattery-110mAh.pdf
Reason for purchase -This is the 3.7V power supply for the lilypad which is raised to 5v by the breakout.
Part #and Name -SEN-00245 One Wire Digital Temp Sensor (Quantity 8)
Manufactures- http://www.maxim-ic.com/
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://datasheets.maxim-ic.com/en/ds/DS18B20.pdf
Reason for purchase -This is the temperature sensor which will gather data about our targets temp. The data is sent to the lilypad which uses it to determine when to operate the TECs.
(
Subtotal : $109.30
Shipping/Handling : $24.99
Grand Total : $134.29)
2 - $29.90 - DEV-10275 - Lilypad FTDI Basic Breakout - 5V ($14.95 ea.)
1 - $1.95 - PRT-09599 - Heat Sink Compound
1 - $14.95 - DEV-08937 - LilyPad XBee
1 - $4.95 - ROB-08449 - Vibration Motor
4 - $17.00 - SEN-00245 - One Wire Digital Temperature Sensor - DS18B20 ($4.25 ea.)
4 - $23.80 - SEN-09673 - Force Sensitive Resistor - Small ($5.95 ea.)
4 - $3.80 - COM-00529 - Super Bright LED - Blue - 1pcs ($0.95 ea.)
3 - $65.85 - DEV-09266 - LilyPad Arduino 328 Main Board ($21.95 ea.)
Subtotal : $162.20
Shipping/Handling : $14.77
Grand Total : $176.97
Shipping estimate for these items: March 2, 2011 - March 3, 2011
$4.89
Sold by: crazyconn
Shipping estimate for these items: March 2, 2011 - March 3, 2011
Electronics; $5.99
Sold by: CircuitCity