Part #and Name -922007094-02 Dynatron DF124028_U 40x40x28MM SLEE (9.78EA Total with S&H = 34.54) Manufactures- www.dynatron-corp.com/ Vendor- www.compuvest.com/ Link to data Sheet- http://www.dynatron-corp.com/en/product_detail_1.aspx?cv=&id=46&in=0 Reason for purchase-This CPU fan was purchased to be a heat sink for our TECs. It will disperse the heat that accumulates on it.
Part #and Name -SEN-00245 One Wire Digital Temp Sensor (Quantity 8) Manufactures- http://www.maxim-ic.com/ Vendor- http://www.sparkfun.com/ Link to data Sheet- http://datasheets.maxim-ic.com/en/ds/DS18B20.pdf Reason for purchase-This is the temperature sensor which will gather data about our targets temp. The data is sent to the lilypad which uses it to determine when to operate the TECs.
Manufactures- www.dynatron-corp.com/
Vendor- www.compuvest.com/
Link to data Sheet- http://www.dynatron-corp.com/en/product_detail_1.aspx?cv=&id=46&in=0
Reason for purchase -This CPU fan was purchased to be a heat sink for our TECs. It will disperse the heat that accumulates on it.
Part #and Name -67-3AIT-R2BW 12"x12" Vacuum Form Machine ($129.95)
Manufactures- http://www.widgetworksunlimited.com/
Vendor- http://www.amazon.com/
Link to data Sheet- http://www.widgetworksunlimited.com/12_x12_Hobby_Vacuum_Former_p/vf-12x12-vac_former.htm
Reason for purchase -This vacuum form machine was purchase to serve as a means to assemble the fans and TECs together as one component.
Part #and Name – COM-10256 MOSFET Power Controll Kit (Quantity 3)
Manufactures- N/A
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/Components/General/MOSFET-Power-Control-v10.pdf
Reason for purchase -This Mosfet is used as a switch by the lilypad to regulate the power flowing to the TECs and Heat Sinks.
Part #and Name -DEV-08786 Lilypad LiPower (Quantity 3)
Manufactures- http://www.arduino.cc/en/Main/ArduinoBoardLilyPad
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/DevTools/LilyPad/LilyPad-PowerSupply-Lipo.pdf
Reason for purchase -This device is built to function as a 5V power supply to the lilypad microcontroller when connected to a battery.
Part #and Name -DEV-09266 Lilypad Arduino 328 Main Board (Quantity 3)
Manufactures- http://www.arduino.cc/en/Main/ArduinoBoardLilyPad
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.atmel.com/dyn/resources/prod_documents/8271S.pdf
Reason for purchase – This Lilypad is the microcontroller for our operation. It will read the temperature data and operate the TECs using the mosfet and code.
Part #and Name -DEV-09716 FTDI Basic Breakout 5V (Quantity 3)
Manufactures- N/A
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/DevTools/Arduino/FTDI%20Basic-v21-5V.pdf
Reason for purchase -This breakout board helps supply the battery power to the lilypad and has indication LEDs to show whether it is operational.
Part #and Name -PRT-00731 Polymer Lithium Ion Battery – 110mAh (Quantity 3)
Manufactures- N/A
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://www.sparkfun.com/datasheets/Batteries/UnionBattery-110mAh.pdf
Reason for purchase -This is the 3.7V power supply for the lilypad which is raised to 5v by the breakout.
Part #and Name -SEN-00245 One Wire Digital Temp Sensor (Quantity 8)
Manufactures- http://www.maxim-ic.com/
Vendor- http://www.sparkfun.com/
Link to data Sheet- http://datasheets.maxim-ic.com/en/ds/DS18B20.pdf
Reason for purchase -This is the temperature sensor which will gather data about our targets temp. The data is sent to the lilypad which uses it to determine when to operate the TECs.